Using too many cleaning chemicals, choosing the wrong towel/mop material, and improperly cleaning the windows are the causes of glass cleaning failures.
Transparent glass surface is very popular in interior design because of its bright, airy, helping small space become more spacious and fresh. Glass windows, glass partitions, glass walls, … although beautiful and luxurious, it has a disadvantage that it is easy to detect stains such as dust, water stains, … To keep the aesthetics of the house. this material, you need to clean it regularly, and it is important to clean it properly.
If you are in the case of cleaning forever but the glass is still not shiny, you may have made 1 of 3, or all 3 of the mistakes below:
1. Using too many cleaning chemicals
Although cleaning chemicals are quick and convenient, if not used correctly, they will not achieve the desired effect. Spraying too much cleaning solution on the surface of the glass will create nasty streaks, especially if they don’t have time to evaporate. Besides, chemical residues on the surface are both wasteful and laborious to wipe over and over again to completely clean.
Tip: Instead of covering the surface of the glass with a solution, just 1-2 sprays of mist or you can spray it on a towel and then wipe it on the glass. In addition, it is necessary to remove stains on the glass surface before spraying to save solution and save time.
» See more: Cleaning the house with cleaning chemicals: 3 bad habits to give up immediately
2. Choosing the wrong towel/mop material
Perhaps a few times you have been in a frustrating mood when the surface of the glass door is stuck with lint, cotton from the same towel or rag that you use when cleaning. If you choose the wrong towel / rag, you will only make the cleaning work go downhill.
Tips: Choose a towel with soft, microfiber, lint-free, heavily woven fabric to remove dirt, water stains and cleaning solutions thoroughly. It is also a good idea for some people to use old clothes that are no longer used to clean their glasses, because old clothes that have been washed many times have worn out and are no longer lint.
3. Improperly cleaning the glass surface
If the first 2 causes come from cleaning solutions, rags, the third cause comes from yourself! If you wipe in many directions, it will leave messy streaks, if you wipe it lightly without enough force, it will not be able to remove the stain.
Tips: Clean the glass rod in a clockwise direction, moving in small circles from the inside to the outside and using enough force to be able to remove stains on the surface. Besides, after the glass door has been cleaned, you need to polish the surface again by checking for missed small streaks, using a clean cloth to rub it one last time to make the glass surface shiny as desired.